尚能风力

Products

Wind Solar Controller

Updated：2008-12-16
Wind solar controllerWind solar controller
Wind solar controllerWind solar controller
NameWind solar street light controllerWind solar controller
Working modeStreet light(L)Standard controller(K)
Applicable batteriesValve Regulated Lead-Acid Battery
Controller working PWM
Applicable wind motor power400W/600W/1000W
System voltage12V/24V/48V
Applicable solar panel current10A
Over charge protection voltage14.1-14.5V/28.2-29.0V
Over discharge protection voltage (lower limit)
Single load (second route) lower limit:
10.8±0.3V/21.6±0.6V
Dual load:
First route lower limit: 11.3±0.3V /22.6±0.6V
Second route lower limit: 10.8±0.3V/21.6±0.6V
10.8±0.3V/21.6±0.6 V
Over discharge recover voltage13.2-13.5V/26.4-27V
DC load routesSingle/dual optional (confirm when order)
Each route load maximum current10A
Empty load consumption≤1％
Charging loop voltage drop≤5％
Temperature compensationOptional feature -5 mv/ºC (single) (confirm when order)
Installation structureWall hanging Al case, inside light pole
SizeMaximum size: W180, H220, D80
Installation parameters: see later figures
Working environment-30℃- +50℃
weightController: 2Kg Dumper: 1.6Kg
NOTE: 1. Must use dumper from the same package as controller!
2. When ordering, provide wind motor rate power and other its characteristic information.
3. Confirm installation bracket direction when ordering.

SymbolDefinitionLightFlashOff
Wind solar controllerRecovery button1. After battery low voltage protection, battery voltage does not reach over-discharge recovery point, but already higher than lower limit, press this button to cancel second route low voltage protection state.
2. When slight overload happens, press this button to cancel overload lockdown.
Wind solar controllerFirst route overload indicateFirst route serious overload, protectedFirst route slight overload, load still attachedFirst route current comply with rate value
Wind solar controllerSecond route overload indicateSecond route serious overload, protectedsecond route slight overload, load still attachedSecond route current comply with rate value
Wind solar controllerLow voltage indicateBattery over-discharge, low voltage protection——Battery voltage normal
Wind solar controllerWorking indicate
Solar charging indicate		Controller workingSolar charging——
Wind solar controllerDump indicate——Battery full
Start dumping		Not dumping
Wind solar controllerWind charging indicateWind motor charging voltage is higher than battery voltage, charging batteryNot charging